SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jibs
Industrial Jibs - Lift truck jibs enable the person operating it to reach over obstructions in order to put their heavy heaps on decks, roofs and even elevated platforms. They are typically utilized to reach through second or third story doorways and even windows to carry and move loads to areas still under construction. Fork truck jibs are really utilized in order to unload trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are also typically used for reaching over scaffolding for masonry work.
Every forklift jib attachment is outfitted with two rotating hooks. One of the hooks could be manually fitted on the bottom of the boom at any position while the second hook stays fixed at the end of the jib. This allows the person operating it to lift things that have two hook points. Dependent upon the dimensions of the model, each hook is rated at either four thousand or six thousand pounds It's possible to utilize either a hook or both to pick up a load. The operator must make certain that the full weight of the jib and the load would not go beyond the rated capability of the jib as shown on the load chart for that retracted or extended position.
Jib attachments are made to be able to be utilized on extendable-reach lifts, rough terrain straight-mast lift trucks and on industrial forklifts. Forklift jib cranes install onto the forklift by means of inserting two forks into the fork pockets. The back of the jib crane then seats against the rear of the fork and a safety chain wraps the forklift carriage to hold it into position.
Jib Boom Forklift Attachment Load Capacity
The load capacity of a forklift jib has a most of approximately 1935 pounds up to 6000 pounds on either the extended or retracted positions range. You might have to ask a material handling specialist about the particular limits of your lift truck use. The load capacity rankings are really used for the jib itself and not the lift truck or the utmost load which can be handled safely with a particular forklift. It is essential to keep in mind that at any time when whatever accessories like for instance a lift truck jib are fitted to the lift truck, the new center of gravity created by the attachment would decrease the general lift capability of the forklift. There are guidelines obtainable which offer details on how to properly estimate these load limits.
Fork Trucks & Fork lift Attachment Safe Usage
Prior to using any lift truck jib, make sure that the shackles and hooks are correctly secured to the lift truck. Make sure and even double check that the pins are tight. It is very important that the weight calculations are properly made and double checked. Bear in mind to take into consideration the truth that rated capacities sometimes lessen when the boom is in a raised position, when the boom is fully extended with telehandlers or every time the mast is slanted forward.
Some vital suggestions about the modifiable jib are: never pull a load with a forklift jib accessory, because these types of attachments are really meant for vertical lift only. Always pick up the load without letting it move back and forth. Use extreme caution every time a load is carried in order to avoid tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 442-281-7816
306 WEST EL NORTE PKWY N-311
Escondido, California
forkliftpartsescondido.com
Email Us
About Us